Skip to main content

Company and director fined after worker falls from height



Prior Homes Limited and company Director Paul Prior have been sentenced after the failure to control the risks associated with working on a fragile roof led to a worker sustaining serious injuries.
Westminster Magistrates’ Court heard how two men were removing panels on a fragile roof when one of them fell through to the floor approximately five metres below.
An investigation by the Health and Safety Executive (HSE) found that Prior Homes Limited had failed to plan the work on the roof or to carry out this work safely. In addition, the investigation also found that, as the Director Paul Prior was personally in charge of this work, he had consented to the unsafe working practices.
Prior Homes Limited of Station Road, Gillingham, pleaded guilty to breaching Regulation 4(1) of the Work at Height Regulations 2005 and was fined £9,334 and ordered to pay costs of £6,398.20. Paul Prior pleaded guilty to breaching section 37(1) of the Health and Safety at Work etc. Act 1974 and was sentenced to a custodial sentence of 8 weeks suspended for 12 months and ordered to undertake 100 hours of unpaid work.
Speaking after the case, HSE principal inspector Keith Levart said: “Falls from height remain one of the most common causes of work fatalities and serious injuries in this country. The risks associated with working at height are well-known.
“Prior Homes Limited and Paul Prior had established an unsafe and poorly planned working practice which lead to a serious injury to one of the workers, and have today been held to account for failing to take adequate action to protect the health and safety of persons working on their site.”

Popular posts from this blog

NEBOSH IGC -01 Importent Questions & Answers

UNIT IGC1: MANAGEMENT OF INTERNATIONAL HEALTH AND SAFETY Element 1: Foundations in Health and Safety 1.     Replacement or repair of damaged plant and equipment is a cost that an organization may face following a workplace accident. List EIGHT possible costs to the organization following a workplace     accident (or)                   (8) Identify the possible cost to an organization following an accident in the workplace. (or) (8) Identify possible costs to an organization resulting from inadequate health and safety standards.                                                (8) (1-5) Direct Costs: ·      ...

Sample Copy of NEBOSH IGC - 3

NEBOSH IGC-2 Very useful Questions & Answers Part-1

UNIT IGC2: CONTROL OF INTERNATIONAL WORKPLACE HAZARDS Element 1: Workplace hazards and risk control 1.      Outline the welfare facilities that should be provided in the building                                                             (8) Drinking water – Access to wholesome drinking water. If non-potable water is also available then supplies should be clearly labeled to distinguish between the two. Sanitary conveniences – access to a sufficient number of sanitary conveniences (WCs) for the number of workers present with separate facilities for men and women. They should be protected f...

Safety Officer's WhatsApp Group Link .

Safety Officer WhatsApp Groups | HSE Professional Networking Join Safety Officer WhatsApp Groups Connect, Learn, and Grow with HSE Professionals Worldwide Why Join the Community? Knowledge Sharing: Advice on protocols and HSE insights. Stay Updated: Real-time news on industry standards and regulations. Networking: Connect with global safety experts. Job Opportunities: Access to exclusive safety job postings. Safety Officer Gulf Join Group Safety (Study & Job) Join Group Safety Officer Jobs Join Group Group Guidelines To ensure a productive environment, please follow these rules: Respect:...

NEBOSH IGC-2 Exam Questions & Answers Part-2 (very very useful and simple )

    Element 5: Electrical safety 1. Identify the possible effects of electricity on the body. (page no: 5-2) § Electric shock – severe electric shock can cause involuntary muscle grip, heart fibrillation, respiratory failure and cardiac arrest. § Burns – burns can also result from an electric shock, at the point of contact and at the point that the current flows out of the body. There may also be internal burns along the current path. § Fire and explosion. § Arcing. § Secondary effects. 2. Outline four factors that may affect the severity of injury from contact with electricity (page no: 5-3) Several factors influence the severity of injury associated with receiving an electric shock: Voltage – as Ohm’s law shows there is a simple relationship between voltage and current, the higher the voltage, the greater the current. Duration – the length of time that a person is exposed to the flow of electricity is critical. For example, a current flow of 60 mA for 30 ...

100 Safety Topics for Daily Toolbox Talk !!!!!!!!! [DOC]

100 Safety Topics for Daily Toolbox Talk | Workplace Safety Guide 100 Safety Topics for Daily Toolbox Talk 100 Safety Topics for Daily Toolbox Talk is a complete workplace safety resource designed for daily toolbox meetings, HSE training sessions, safety awareness programs, and industrial safety compliance . What is a Safety Toolbox Talk? A toolbox talk is a short safety discussion conducted at the workplace to highlight hazards, safe work practices, and accident prevention methods. Why Daily Toolbox Talk is Important? Prevents workplace accidents and injuries Improves employee safety awareness Ensures compliance with HSE standards Creates a strong safety culture Key Safety Topics Covered Fire and Fire Fighting Systems Electrical Safety and Shock Hazards Personal Protective Equipment (PPE) First Aid and Emergency Response Workplace, Road, and Home Safety Index of 100 Safety Topics for Daily Toolbox Talk What is Fire Classes of Fires an...

Important 54 Safety Toolbox Talk Topics Free download in PDF

Most Important 54 Safety Toolbox Talk Topics – Free PDF Download Toolbox talks are short safety briefings or discussions conducted on specific safety topics relevant to a group of workers. They usually focus on workplace hazards, control measures, and lessons learned from recent incidents . Toolbox talks are typically delivered to workers operating in a specific area. The group size may range from a few workers to more than 100 people. These talks should be used by toolbox talk leaders, supervisors, and safety officers to prepare effective briefings. Management attending toolbox talks can also use them to assess quality and provide constructive feedback. 📌 Tool Box Talks – Preparation Choose a suitable toolbox talk topic relevant to the audience Cover site-specific hazards and their control measures Include learning from incidents to explain possible consequences Provide updates on recent safety deviations or incidents Select the presenter (normally a superv...

Very Very Useful Job Safety Analysis for 34 mechanical Jobs ....

Overview JSA INDEX Sheet1 Sheet2 Sheet3 Sheet4 Sheet5 Sheet6 Sheet7 Sheet8 Sheet9 Sheet10 Sheet11 Sheet12 Sheet13 Sheet14 Sheet15 Sheet16 Sheet17 Sheet18 Sheet19 Sheet20 Sheet21 Sheet22 Sheet23 Sheet24 Sheet25 Sheet26 Sheet27 Sheet28 Sheet29 Sheet30 Sheet31 Sheet32 Sheet33 Sheet34 Sheet 1: JSA INDEX S no. JSA sheet main activity 1 Vehicle Entry inside the plant for loading/unloading material 2 PM of Pumps 3 PM/Maintenance of Fin Fans 4 Insulation Removal and Refixing 5 PM of Steam Turbines 6 Pump seal/bearing replacement/overhauling 7 Pump Decoupling for motor replacement 8 Nitrogen hose connection for purging of lines and equipments/vessels 9 Blinding/Deblind...

[Doc] Occupational health and safety plan (HSE Plan) download in Doc Format

[Doc] Occupational health and safety plan (HSE Plan) download in Doc Format  SECTION TITLE PAGE NO. 1.0 INTRODUCTION 05 1.1 Scope 05 1.2 Purpose 05 2.0 OUR PHILOSOPHY 06 3.0 ABBREVIATION 07 4.0 HSE POLICY 08 5.0 SAFETY ORGANISATION STRUCTURE 09 6.0 SITE DETAILS 11 7.0 DEFINITION 11 7.1 Site 11 7.2 Plant 11 7.3 Owner 11 7.4 PMC/Consultant 11 7.5 Contractor 11 7.6 Works 11 7.7 Accident 11 7.8 Exposure 11 7.9 Fatality 12 7.10 Harm 12 7.11 Hazard 12 7.12 Housekeeping 12 7.13 Incident 12 7.14 Interface Document 12 7.15 Lost T...

Download HSE interviews useful questions and answers in PDF

HSE Interview Questions – Refresh Your Safety Knowledge (Oil & Gas) HSE interview questions help safety professionals refresh and test their knowledge. If you are working in the oil and gas industry as a safety officer , you must know the answers to these important HSE questions. Download this HSE questionnaire PDF to prepare for interviews, improve your safety awareness, and strengthen your professional knowledge. 👍 💬 Comment your HSE questions below For downloading this HSE Questionnaire, click the button below 👇 Please comment your safety-related questions. If you want a WhatsApp group to discuss safety topics , comment your mobile number 🔔