Skip to main content

Posts

Showing posts from July, 2015

Total Pageviews

adster

Safety Toolbox Talk - Incident Accident and Reporting of Near Misses

                            It is important that accidents and near misses are reported. Accidents and near miss reporting enables proper first aid treatment to be administrated where injuries are sustained, reducing the risk of further infection or complication and assisting the recovery process. The reporting of accidents and near misses also helps to identify hazards that need to be rectified or controlled to prevent accidents from occurring in the future. Definitions There are a number of key words that are relevant to accidents and near misses. Accident - are unplanned events that may or may not cause injury or property damage. Near Miss – is an incident where change of circumstances or timing may have resulted in injury or property damage being sustained? Hazard – is anything with the potential to cause harm to people or property. Risk – is the chance or likelihood that a hazard will cause injury or damage. Lost Time Injury –

Download Very Simple and useful Risk Calculator Software (Windows )

Share Riskex-Risk-Score-Calculator-12.exe - 809 KB

Sample Copy of NEBOSH IGC - 3

NEBOSH IGC Study Material (Very Simple way )

Scaffolder Fall from Height .. identify the hazards & safety measure

Watch this video and identify why this accident happened & how can avoid this type of accident on our work area ?  

The killer "H2S" (Accident Video ) 3 People were Died

Job Specific PPE's for diffrent type of Job (Very good Training Material )

We are get so many types of PPE'S on our work site but if we don't know about Job Specific PPE'S then  We will fail on Safety . So This Given below details Should be help You to know Job specific PPE's . This details share to all employees 

CPR training Video new Tips

Know what is Safety Management System (SMS) Audit

welding, cutting, and brazing check list as per OSHA

This checklist has been compiled to aid those employers and employees in general industry and construction who seek to comply voluntarily with the Occupational Safety and Health Administration’s (OSHA) standards for welding, cutting, and brazing. The questions that make up this checklist are based on 29 Code of Federal Regulations (CFR) Part 1910, Subpart Q, and 29 CFR Part 1926, Subpart J, (OSHA) Occupational Safety and Health Standards for the General and Construction Industry.

A for Accident B for Biological agents C for Confined spaces , D for Damage control this is a Safety Dictionary ..

METHOD FOR COMPUTATION OF FREQUENCY AND SEVERITY RATES FOR INDUSTRIAL INJURIES AND CLASSIFICATION OF INDUSTRIAL ACCIDENTS(IS-3786.1983)

Know your knowledge about Hazardous Material with This Simple Quiz programme (10 simple questions)

 Choose Right Answer Which part of the NFPA marking system implies flammability? A. White B. BLUE C. YELLOW D.RED Which of these is NOT a probable physical hazardous characteristic of a chemical? ? A. Flammable B. Acute C. Corrosive D.Reactive What does the acronym PEL stand for? A. Permissible Exposure Limit B.Prohibitive Electric Level What should you do first in an event involving hazardous materials? A. Send someone for help and warn others of the danger B. Move leaking material out of the way C.Try to extinguish any fires D.Move your truck/trailer away from the scene How are entries in the Hazardous Materials Table displayed? A. In order of risk B. In order of quantities being shipped C.In alphabetical order by proper shipping names D.In alphabetical order by brand names While transporting hazardous waste, you should ?? A. Carry a Uniform Hazardous Waste Manifest in the truck B. Sign a unif

Followers

Official Facebook page