[Doc] Occupational health and safety plan (HSE Plan) download in Doc Format

SECTION	TITLE	PAGE NO.
1.0	INTRODUCTION	05
1.1	Scope	05
1.2	Purpose	05
2.0	OUR PHILOSOPHY	06
3.0	ABBREVIATION	07
4.0	HSE POLICY	08
5.0	SAFETY ORGANISATION STRUCTURE	09
6.0	SITE DETAILS	11
7.0	DEFINITION	11
7.1	Site	11
7.2	Plant	11
7.3	Owner	11
7.4	PMC/Consultant	11
7.5	Contractor	11
7.6	Works	11
7.7	Accident	11
7.8	Exposure	11
7.9	Fatality	12
7.10	Harm	12
7.11	Hazard	12
7.12	Housekeeping	12
7.13	Incident	12
7.14	Interface Document	12
7.15	Lost Time Injury (LTI)	12
7.16	Medical Treatment Case (MTC)	12
7.17	Restricted Work Case (RWC)	12
7.18	Near Miss	12
7.19	Risk	13
7.20	Risk Assessment	13
7.21	Risk Management	13
7.22	Personal Protective Equipments	13
7.23	Training	13
7.24	Unsafe Act or Condition	13
7.25	Work Site	13
8.0	COMMITMENTS OF	13
9.0	HSE ROLES AND RESPONSIBILITY	14
9.1	Site Safety Committee	14
9.2	Project Manager	14
9.3	Site Engineer	15
9.4	HSE Officer	15
10.0	HOUSE KEEPING	16
11.0	RULES AND REGULATIONS	16
12.0	LIST OF STATUTORY ACTS AND RULES	17
13.0	IS – CODES FOR HSE	17
14.0	HSE CONROLL ARRANGEMENTS	18
14.1	General	18
14.2	Shall Ensure	18
14.3	Induction Training	19
14.4	Safety Toolbox Talks	19
14.5	Supervisor’s Training	20
14.6	Worker’s Training	20
14.7	Motivational Program	20
14.8	Site Inspection of Work place and Safety Audit	21
14.9	Safety Meeting	21
14.10	Reporting of Accident/Fire	21
14.11	Emergency Action Plan	21
14.12	Environmental Control	22
14.13	Personal Protective Equipments	22
15.0	GENERAL SAFET RULES	22
16.0	LIST OF JOB SPECIFIC PPEs TO BE USED AT SITE	23
17.0	SAFE WORK PRACTICE FOR VARIOUS TYPES OF ACTIVITIES	24
17.1	Excavation	24
17.2	Fabrication	24
17.3	Erection	25
17.4	Structural Erection	25
17.5	Welding and Gas Cutting	25
17.6	Dealing of Compressed Gas Cylinders	25
17.7	Grinding	26
18.0	Ground Access	27
19.0	WORKING AT HEIGHT	27
19.1	Ladders	28
19.2	ACCESS TO WORK AT HEIGHTER LEVEL	28
19.3	Safety Net Systems	29
19.4	Scaffold	29
20.0	ELECTRICAL SAFETY	30
20.1	Portable Electrical Hand Tools	31
20.2	Power Tools	32
21.0	HANDLING OF DIESEL	32
22.0	HANDLING OF REINFORCEMENT	33
23.0	STACKING AND UNSTACKING OF MATERIALS	33
23.1	Manual Handling of Materials	33
23.2	Mechanical Handling of Materials	34
24.0	MACHINERIES AND EQUIPMENTS	35
24.1	Concrete Batching Plant	35
24.2	Concrete Mixer	35
24.3	Concrete Pump	35
24.4	Concrete Vibrator and Earth Compactors	36
24.5	Heavy Equipment Safety	36
25.0	CHEMICAL HANDLING	36
26.0	RECORD KEEPING	37
27.0	JOB HAZARD ANALYSIS (JHA) / HIRA	37
28.0	PROJECT SAFETY SIGNS	38
29.0	DRINKIING WATER AND REST SHED FACILITY	38
30.0	TRAFIC MANAGEMENT	39
31.0	FIRST-AID FACILITIES AND MEDICAL TREATMENTS	39
32.0	FIRE SAFETY AT SITE	39
	MSDS
33.0	EMERGENCY PREPAREDNESS AND RESPONSE PLAN	42
34.0	HSE INSPECTION CHECKLISTS	43
35.0	HSE FORMATES

DEFINITIONS

7.1 SITE

Site means the place so designated by owner for construction of the Project including such places in and around/adjacent, which are for storage and assembling of materials, equipments and machineries.

7.2 PLANT

Plant means the plant(s) and other associated facilities and installations all of which shall be completed and managed by the owner.

7.3 OWNER

Owner means Client and his organisation and includes his/its representative its successors in title and permitted assignees.

7.4 PMC/CONSULTANT

PMC/Consultant means the agency acting as Project Managing Consultant (PMC) for the project under construction and authorized to act on behalf of owner with respect to contract agreement, for providing project management consultancy services.

7.5 CONTRACTOR

Contractor means & its authorized representatives successors and permitted assignees.

7.6 WORKS

Work means all the technical & professional services & responsibilities to be performed by NCCL as specified stated, indicated or implied in this contract.

7.7 ACCIDENT

An unplanned or undesired event that can result in harm to people, property or the Environment.

7.8 EXPOSURE

The measurement of time during which the subject is at risk from a hazard.

7.9 FATALITY

Death due to a work related incident or illness regardless of the time between injuries or illness and death.

7.10 HARM

Includes death, injury, physical or mental ill health, damage to property, loss of production or any combination of these.

7.11 HAZARD

A source or a situation with a potential to cause harm, including human injury or ill health, damage to property, damage to the environment, or a combination of these.

7.12 HOUSEKEEPING

Maintaining the working environment in a tidy manner.

7.13 INCIDENT

An event that:

─ Results in death or injury to person where the injury requires medical attention (including first aid)

─ Results in injury/damage to persons, property or process;

─ Is not in compliance with statutory requirements, safe work procedures or in-house guidelines.

7.14 INTERFACE DOCUMENT

A document that clearly identifies how the Owner’s HSE expectations and the PMC/Contractor HSE management systems will be interlinked during the work programmed.

7.15 LOST TIME INJURY (LTI)

Work related injury or illness that renders the injured person unable to perform any of their duties or return to work on a scheduled work shift (24 Hrs), on any day immediately following the day of the accident.

7.16 MEDICAL TREATMENT CASE (MTC)

Work related injury or illness requiring more than first aid treatment by a physician, dentist, surgeon or registered medical personnel.

7.17 RESTRICTED WORK CASE

Work related injury or illness that renders the injured person unable to perform all normally assigned work functions during a scheduled work shift or being assigned to another job on a temporary or permanent basis on the day following the injury.

7.18 NEAR MISS

A Near Miss is an event where no contact or exchange of energy occurred and thus did not result in personal injury, asset loss or damage to the environment.

7.19 RISK

A measure of the likelihood that the harm from a particular hazard will occur, taking into account the possible severity of the harm.

7.20 RISK ASSESSMENT

The process of analyzing the level of risk considering those in danger, and evaluating whether hazards are adequately controlled, taking into account any measures already in place.

7.21 RISK MANAGEMENT

The process of identifying hazards, assessing risk, taking action to eliminate or reduce risk, and monitoring and reviewing results.

7.22 PERSONAL PROTECTIVE EQUIPMENT (PPE)

All equipment and clothing intended to be utilized, which affords protection against one or more risks to health and safety. This includes protection against adverse weather conditions.

7.23 TRAINING

The process of imparting specific skills and understanding to undertake defined tasks.

7.24 UNSAFE ACT OR CONDITION

Any act or condition that deviates from a generally recognized safe way or specified method of doing a job and increases the potential for an accident.

7.25 WORKSITE

The premises where any building operations or works of engineering construction related to the work program are being carried out

For Download this HSE plan in Word Format [Doc] click below